Function:
Reading DTCs (diagnostic trouble codes)
Reseting check-engine and service engine soon
Clearling DTC’s (diagnostic trouble codes)
Resetting Oilservice and inspection light
Restting maintenance milage indicator
Inspection reset,
Function reference:
1. fault code read the tool automatically starts in this mode,(thought it won’t read the fault codes until you press the “enter”buttom),when enter is pressed the unit will attempt to read the fault codes, if there are no faults it will display”-“, if it ifinds faults, it will automatically display the number of the code table to use(see user’s manual).to then view the faults pree enter, repeat unit the end of the fault list-(tool will show”-“),pree enter to return to “ FC”(starting point)
2.MIL Reset. (Resets” Check engine” or service engine soon)when you have selected ce in the display, you are now ready to reset the MIL “ malfunction indicator lamp”,pressing enter will execute the reset when finished it will return to “Fc”, this clears all faults and extinguished the MIL, to verify the rest, UNPLUG the tool and start the engine MIL should be off.(Note: After a MIL reset,on some models with automatic transmission, the automatic transmission light will be on. To clear it, simply start the engine twice.)
3. Oil service reset, when you have selected ol in the display, you are now ready to reset procedure the display will count from Oto2, when finished the display will return to “Fc”, si indicator will indicate a successful reset when finished. (see user’s manual)
Package:
1.Main unit
2.OBDII Cable
3.User’s Manual
4.Nylon Bag
|
|
|
|
| Payment Terms︰ | Westerm union/TT/Paypal |
|
|
| Select Image |
 |
|
|
|
|
